OTHER

As a trade company we are always studying new products appearing on the world market to meet our customers’ satisfaction.

As our special offer we can supply: oils, greases and lubricants

AMG-10 GOST 6794-75

AMG-10 is made on the base of highly dearomatized waxy fraction, prepared from paraffin crude hydrocracking products and consisting from naphthenic and isoparaffinic hydrocarbons. AMG-10 contains thickening and intoxicating additives and special distinguishing organic dye.

AMG-10 is used for aviation and ground-based equipment, operating at the ambient temperature between – 60°C and + 55°C.

 

Characteristics Norm
Kinematic viscosity, cSt
at 50°С, not less 10
at -50°, not more 1250
Viscosity index, not less
Acid number , mg KOH/g of oil, not more 0,03
Flash point in the open crucible, °C, not less 93
Pour point, °C, not more -70
Density at 20°С, kg/m3, not more 850

 

7-50s-3 GOST20734-75

7-50s-3 is made from polysiloxane fluid and organic ether mixture blended with wear-preventive additive and oxidation inhibitors. 7-50s-3 is applied in military aircraft hydraulic systems. (Including MiG-25, MiG-29).

 

Characteristics Norm
Kinematic viscosity, cSt
at 200°С, not less 1,3
at 20°С, not less 22
at -60°C, not more 4200
Flash point in the open crucible, °C, not less 200
Pour point, °C, not more -70
Acid number, mg KOH/g of oil, not more 0,1
Density at 20°С, kg/m3, not more 930-940

 

MGE-10A GOST 38. 01281-82

MGE-10A is made on the basis of high-dearomatized waxy fraction, prepared from paraffin crude hydrocracking. MGE-10A contains thickening, antioxidant, wear-resistant and antirust additives.

 

Characteristics Norm
Kinematic viscosity, cSt
at 50°С, not less 10
at -50°C, not more 1500
Viscosity index, not less
Acid number mg KOH/g of oil, not more 0,4-0,7
Flash point in the open crucible, °C, not less 96
Pour point, °C, not more -70

 

 

TS-gip TU 38.1011332-90 am. 1

Application: TS-gip is applicable in elements of helicopter’s transmission.

Characteristics Norm
Kinematic viscosity, mm2/s (cSt) at 100°С, not less 18,0
Mechanical dash content, %, not more 0,10
Water content, %, not more
Sulfur content, %, not less 1,5
Pour point, °С, not more -18
Corrosion after oxidation on plates:
Steel 40 or 50 (GOST 1050) Stand
М2 copper (GOST 859) Darkening

 

MS-8p OST 38.01163-78

Application: MS-8p is applicable in gas turbine engines of subsonic and supersonic airplanes (civil aviation airplanes Il-62, Il-76, Tu-134, Tu-154, Yak – 40, military aviation airplanes MiG-21, Su-15, Su-25, helicopters Mi-6, Mi-10) which have oil temperature (at the outcome) up to +150°C.

MS-8p is applied as a part of oil mixtures in propeller turbines (airplanes An-12, An-22, An-24, An-30, Il-18) and also for preservation of engine’s oil systems. It is also used in gas turbine facilities of vessels and gas pumping aggregates.

MS-8p is a crude oil-based lubricant complicated with high-performance additives. It has been developed to replace oils MK-8 and MK-8p, it has superior operating characteristics such as improved viscosity at low temperatures, improved thermal-oxidative stability and life time.

 

Characteristics Norm
Kinematic viscosity, cSt
at 50 °С, not less 8,0
at -40°С, not more 4000
Flash point in the closed crucible, °С, not less 145
Pour point, °С, not more -55
Thermal and oxidation stability at 150°С for 50h
kinematic viscosity at 50°С after oxidation, cSt, not more 10
kinematic viscosity at -40°С after oxidation, cSt, not more 5500
acid number after oxidation, mg KOH/g of oil, not more 0,4
residue after oxidation, %, not more 0,15
corrosion after oxidation on plates, mg/sm2 , not more:
ShH-15 steel (ШХ-15) (GOST 801-60) not
M1 or M2 copper (GOST 859-66) ±0,2
AK-4 Aluminum alloy (GOST 4784-74) not
Acid number, mg KOH/g of oil, not more

 

MS-8rk TU 38.1011181-88

MS-8rk is applied for lubrication and preservation of aeroengines.

The oil MS-8rk is equal to oil Ms-8r by operational characteristics and is superior to it by preservation characteristics.

The protection period for the conserved aeroengine oil systems amounts to: 3 months for oil Mk-8, 1 year for Ms-8p oil, 4-8 years for MS-8rk oil.

 

Characteristics Norm
Kinematic viscosity, cSt
at 50°С, not less 8,0
at -40°С, not more 5000
Flash point in the open crucible, °С, not less 145
Pour point, °С, not more -55
Thermal and oxidation stability at 150°С for 50h
kinematic viscosity at 50°С after oxidation, cSt, not more 11
kinematic viscosity at -40°С after oxidation, cSt, not more 6750
acid number after oxidation, mg KOH/g of oil, not more 0,7
residue after oxidation, %, not more 0,15
corrosion after oxidation on plates, mg/sm2 , not more:
ShH-15 steel (ШХ-15) (GOST 801-60) not
M1 or M2 copper (GOST 859-66) ±0,2
AK-4 Aluminum alloy (GOST 4784-74) not
Acid number, mg KOH/g of oil, not more

 

MS-20 GOST 21743-76

MS-20 is applied in airplane piston engines. The oil is used as a component of oil mixtures in lubricating systems of propeller turbines.

MS-20 is applied in the feathering hinges of propeller hubs. Moreover, the oil is used in lubrication of gas pumping aggregate’s motocompressors. MS-20 is also applied in diesel engine speed controllers with autonomous oil systems and casings.

 

Characteristics Norm
Kinematic viscosity 100°С, mm2/c, not less 20,5
Viscosity index, not less 80
Coking capacity, %, not more 0,29
Flash point in the open crucible, °С, not less 265
Pour point, °С, not more -18

 

SM-4,5 OST 54-3-175-72-99

SM-4,5 is mixture of aviation oils MS-8p and MS-20 in proportion 75:25 ( mass portion, %)/

SM-4,5 is applied in airplanes with turboprop engines of AI-20 type (airplanes An-12, Il-18) and of Ai-24 type (airplanes An-24, An-26, An-30, An-32).

 

Characteristics Norm
Kinematic viscosity at 100°C, mm2/s 4,3-4,7
Flash point in the open crucible, °С, not less 138
Pour point,°С, not more -35
Thermal and oxidation stability at 150°у for 50h
kinematic viscosity at 100°C, after oxidation, mm2/s 5,0
kinematic viscosity at -15°C, after oxidation, mm2/s 950,0
acid number after oxidation, mg KOH/g of oil, not more 0,06
residue after oxidation, %, not more 0,025

 

VNII NP-50-1-4u TU 38.40158-12-91 with changes 1,2

VNII NP-50-1-4u is high quality synthetic diether oil. Its additives package is more effective than the additive package of VNII NP-50-1-4f, which allows to increase thermo-oxidative stability to 200°C with overheating up to 225°C, at the same time it doesn’t lose the low-temperature characteristics (can be used at the temperature as low as – 60°C) and other operational characteristics.

The oil is compatible with VNII NP 50-1-4f in all respects, doesn’t require rubber and structural material replacement and can be applied in perspective engineering. Major use in military engineering. Highly recommended for perspective engineering.

The oil VNII NP 50-1-4u successfully passed technical testings, including flight testing, which showed that usage of this oil instead of “f” oil allows to increase its working life, the oil mustn’t be changed during the engine working period.

The oil is used in turbojet engines of civil aircraft (Il-96-300, Tu-204, Yak-42, An-74, “Ruslan”), military aircraft (MiG-23, MiG – 27, MiG – 29, An – 72) and helicopters Mi-26.

 

 

Characteristics Norm
Kinematic viscosity, cSt
at 100°С, not less 3,2
at -40°С, not more 2700
at -50°С, not more 8500
Flash point in the open crucible, °С, not less 204
Pour point,°, not more -60
Thermal and oxidation stability at 200°С for 50h
a) residue after oxidation, %, not more 0,15
b) acid number after oxidation, mg KOH/g of oil, not more 4,5
c) kinematic viscosity after oxidation, cSt, not more
at -40°С, not more
at 100°С, not more 3,7
d) corrosion after oxidation on plates, mg/sm2 , not more:
AK-4 Aluminum alloy (GOST 4784-74) ±0,1
M1 or M2 copper (GOST 859-66) ±0,4
ShH-15 steel (GOST 801-60) ±0,1

 

VNII NP-50-1-4f GOST 13076-86

VNII NP-50-1-4f is high quality synthetic diether oil with additives, which increase wear-protection characteristics and thermal-oxidative stability. VNII NP-50-1-4f is used in turbojet airplane engines with the oil temperature (at outcome) up to 175 C (civil aircraft Il-96-300, Tu-204, Tu-214, Tu-334, Yak-42, An-74, An-124 `Ruslan`, military aircraft Su-15, Su-17, Su-20, Su-24, Su-25, Su-27, Su-30, MiG-21, MiG-23, MiG-27, MiG-31, An-72, Tu-22, helicopters Mi-26). VNII NP-50-1-4f is also applied in turborefrigerating conditioning systems LA and in aviation gas-turbine engines of gas-pumping aggregations.

 

 

Characteristics Norm
Kinematic viscosity, cSt
at 100°С, not less 3,2
at -40°, not more 2000
at -50°, not more 11000
Flash point in the open crucible, °С, not less 204
Pour point,°С, not more -60
Thermal and oxidation stability at 175° for 72h
a)corrosion after oxidation on plates, mg/sm2 , not more:
– made from З0ХГСА steel (GOST 4543-71), АК4 wrought aluminum alloy (GOST 4784-74), Мl 5 magnesium castable alloy (GOST 2856-79) and from silver (GOST 6836-72) ±0,2
– M1 copper (GOST 859-78) ±0,4
b) acid number after oxidation, mg KOH/g of oil, not more 2,0
c) viscosity change after oxidation, determined at 100°С, %, not more 7
d) appearance of oil after oxidation transperant, not sediment after sedimentation
e) conditions of apparatus and plates after oxidation no carbon deposits
Thermal and oxidation stability at 175°С for 50 h and air consumption (10±0,5) dm3/h:
a) residue after oxidation, %, not more 0,3
b) acid number after oxidation, mg KOH/g of oil, not more 0,4
c) kinematic viscosity after oxidation, cSt, not more
at -40°С, not more 3500
at 100°С, not more ±2,0
d) corrosion after oxidation on plates, mg/dm2 , not more:
AK-4 Aluminum alloy (GOST 4784-74) ±2,0
M1 or M2 copper (GOST 859-66) ±1,5
ShH-15 steel (GOST 801-60) 0

 

IPM-10 TU 38.101299-90

IPM-10 is synthetic hydrocarbon oil with a package of highly effective additives.

IPM-10 is used in heat-intense gas turbine engines of civil and military aviation with oil temperature up to 200 C (at the outcome). It is also applied as standardized oil in aviation turborefridgrators and other aggregations especially in gas-pumping aggregations with airengine driving gear.

 

 

Characteristics Norm
Kinematic viscosity, cSt
at 100°С, not less 3,0
at -40°С, not more 3000
Flash point in the open crucible, °С, not less 190
Pour point,°С, not more -50
Thermal and oxidation stability at 200°С for 50h
a) residue after oxidation, %, not more 0,35
b) acid number after oxidation, mg KOH/g of oil, not more 8
c) kinematic viscosity after oxidation, cSt, not more
at -40°С, not more 5000
at 100°С, not more 5,0
d) corrosion after oxidation on plates, mg/sm2 , not more:
AK-4 Aluminum alloy (GOST 4784-74) 0
M1 or M2 copper (GOST 859-66) 0,2
ShH-15 steel (GOST 801-60) 0

 

B-3V TU 38.101295-85

B-3V is synthetic oil based on penthaerythrite esters and fatty acids with a complex of additives. It is used in gas turbine engines, helicopter reductor’s gears and other equipment with an outcome oil temperature up to 200°C.

 

Characteristics Norm
Kinematic viscosity, cSt
at 100°С, not less 5,0
at -40°С, not more 12500
Flash point in the open crucible, °С, not less 235
Pour point,°С, not more -60
Thermal and oxidation stability at 200°С for 10h
a) residue after oxidation, %, not more 0,11
b) acid number after oxidation, mg KOH/g of oil, not more 0,7-2,0
c) kinematic viscosity after oxidation, cSt, not more
at -40°С, not more 20000
at 100°С, not more 6,0
d) corrosion after oxidation on metallic bars, mg/sm2 , not more:
AK-4 Aluminum alloy (GOST 4784-74)
M1 or M2 copper (GOST 859-66)
ShH-15 steel (GOST 801-60)
Storage period, year 5

 

VO-12 TU 0253-005-00148613-2000

VO-12 is mixture of synthetic hydrocarbon and diether oils with a package of additives. This multigrade oil is used for the lubrication of the axial bearing of propeller hubs (in helicopters).

 

Characteristics Norm
Kinematic viscosity, cSt
at 100°С, not less 12,0
at -30°С, not more 16000
Flash point in the open crucible, °С, not less 240
Pour point,°С, not more -54
Viscosity index, not less 120

 

Tp-22S TU 38.101821-2001

Tp-22S is produced from sulfur-bearing waxy oils refined with solvent refining agents. It contains antioxidant, antirust and demulsifying additives.

The oil is applied in gas and steam turbine lubrication and control systems, in lubrication systems of gas pumping plants, in some centrifugal and turbo compressors.

 

Characteristics Norm
Kinematic viscosity, cSt
at 50°С 20-23
at 40°С 28,8-35,2
Viscosity index, not less 90
Pour point,°С, not more -15
Flash point in the open crucible, °С, not less 186
Stability against oxidation, not more:
а) deposit , % 0,005
б) acid number after oxidation, mg КОH/g oil, not more 0,1
The number of demulsification, с, not more 180
Density at 20°С, kg/m3, not more 900

 

Tp-30 GOST9972-74

Tp-30 is made from waxy oils refined with solvent refining agent. It contains additives, improving antioxidant and antirust characteristics.

Tp-30 is used for the lubrication of power stations hydraulic turbines, for the lubrication of some centrifugal and turbo compressors.

 

Characteristics Norm
Kinematic viscosity, cSt
at 40°С 41,4-50,6
Viscosity index, not less 95
Pour point,°С, not more -10
Flash point in the open crucible, °С, not less 190
Stability against oxidation, not more:
а) deposit, % 0,01
б) acid number after oxidation, mg KOH/g of oil, not more 0,5
The number of demulsification, с, not more 210
Density at 20°С, kg/m3, not more 895

 

 

SGT GOST10289-79

SGT is produced from selectively treated transformer oil with antiscuff and antioxidant additives.

It is used for lubrication and cooling of gas turbine reduction gears and bearings installed on ships, in gas pumping plans. SGT is also applied in power stations generator drive.

Characteristics Norm
Kinematic viscosity, cSt
at 50°С 7,0-9,6
at 20°С, not more 30
Viscosity index, not less 0,02
Pour point,°С, not more – 45
Flash point in the open crucible, °С, not less 135
Ash content, %, not more: 0,005
Stability against oxidation, not more:
а) deposit , % 0,2
б) acid number after oxidation, mg KOH/g of oil, not more 0,65

Tp-46 GOST 9972-74

Tp-46 is made from waxy oils refined with solvent refining agent. It contains additives, improving antioxidant and antirust characteristics.

Tp-46 is used in ship steam plants with heavy duty reduction gears.

 

Characteristics Norm
Kinematic viscosity, cSt
at 40°С 61,2-74,8
Viscosity index, not less 90
Pour point, °С, not more -10
Flash point in the open crucible, °С, not less 220
Stability against oxidation, not more:
а) deposit, % 0,008
б) acid number after oxidation, mg KOH/g of oil, not more 0,7
The number of demulsification, с, not more 180
Density at 20°С, kg/m3, not more 895

 

KS-19 GOST 9243-75

KS-19 is produced from selectively treated sweet oils. The oil is used in lubricating medium- and high-pressure piston compressors.

 

Characteristics Norm
Kinematic viscosity, cSt
at 100°С 18-22
Viscosity index, not less 92
Acid number mg KOH/g of oil, not more 0,02
Flash point in the open crucible, °С, not less 260
Pour point, °С, not more -15
Sulfur content, % (mass fraction), not more 1,0
Density at 20°С, kg/m3, not more 905

 

KS-19p TU 38.4011055-97

KS-19p is produced from selectively treated sweet oils. The oil contains antioxidant ionol additive. KS-19p is used in lubricating medium- and high-pressure piston compressors

Characteristics Norm
Kinematic viscosity, cSt
at 100°С 18-24
Viscosity index, not less 85
Acid number mg KOH/g of oil, not more 0,03
Flash point in the open crucible, °С, not less 260
Pour point, °С, not more -15
Sulfur content, % (mass fraction), not more 1,0
Density at 20°С, kg/m3, not more 905

Kp-8s TU 38.1011296-90

Kp-8S is produced from selectively treated sweet oils.

The oil is applied in lubrication of turbocompressors with high duty reducers.

Characteristics Norm
Kinematic viscosity, cSt
at 100°С 6,5-9
Viscosity index, not less 95
Acid number mg KOH/g of oil, not more 0,05
Flash point in the open crucible, °С, not less 200
Pour point, °С, not more -15
Sulfur content, % (mass fraction), not more 0,5
Density at 20°С, kg/m3, not more 885

 

KHA-30 GOST5546-86

KHA-30 is made from residual and distillate petroleum oils. The oil is applied in compressors operating on ammonia or carbon dioxide

 

Characteristics Norm
Kinematic viscosity, cSt
at 20°С, not more 150
at 50°С 28-32
Acid number mg KOH/g of oil, not more 0,05
Flash point in the open crucible, °С, not less 185
Pour point, °С, not more -38
Ash content, %, not more 0,004
Stability against oxidation, not more:
а) deposit, % 0,02
b) acid number after oxidation, mg KOH/g 0,5

 

 

KHF 12-16 GOST5546-86

KHF 12-16 is made from petroleum oil with antioxidant additive. It is used for compressors of freon refrigerating unit operated by means of cooling agent R-22.

 

Characteristics Norm
Kinematic viscosity, cSt
at 20°С, not less 17
at 50°С, not less 16
Acid number mg KOH/g of oil, not more 0,02
Flash point in the open crucible, °С, not less 174
Pour point, °С, not more -42
Stability against oxidation, not more:
а) deposit, % 0,005
b) acid number after oxidation, mg KOH/g 0,04

 

KHF 22-24 GOST 5546-86

KHF 22-24 is petroleum solidified oil. It is used for compressors of freon refrigerating unit operated by means of cooling agent R-22.

 

Characteristics Norm
Kinematic viscosity, cSt
at 20°С
at 50°С 24,5-28,4
Acid number mg KOH/g of oil, not more 0,04
Flash point in the open crucible, °С, not less 130
Pour point, °С, not more -55
Stability against oxidation, not more:
а) deposit, %
b) acid number after oxidation, mg KOH/g

 

GK TU 38.1011025-85

GK is produced from sulfur-bearing waxy oils using hydrocracking. The oil contains ionol additive.

GK is applied in electrical equipment operated at upper voltage.

 

Characteristics Norm
Kinematic viscosity, cSt
at 50°С 9
at -30°С 1200
Acid number mg KOH/g of oil, not more 0,01
Flash point in the closed crucible, °С, not less 135
Pour point, °С, not more -45
Stability against oxidation, not more:
а) deposit, % 0,015
b) flying low-molecular acids, mg КОH/g 0,04
c) acid number after oxidation, mg KOH/g 0,1
Tangent of a corner dielectric loss at 90°С, %, not more 0,5
Density at 20°С, kg/m3, not more 895

T-1500u TU 38.401-58-107-97

T-1500u is produced from selectively treated and hydrogenated sulfur-bearing waxy oils. The oil contains ionol additive. T-1500u is recommended to be used in electrical equipment working at voltage up to 500 kV and higher.

 

Characteristics Norm
Kinematic viscosity, cSt
at 50°С 11
at -30°С 1300
Acid number mg KOH/g of oil, not more 0,01
Flash point in the closed crucible, °С, not less 135
Pour point, °С, not more -45
Stability against oxidation, not more:
а) deposit, % 0
b) flying low-molecular acids, mg КОH/g 0,05
c) acid number after oxidation, mg KOH/g 0,2
Tangent of a corner dielectric loss at 90°С, %, not more 0,5
Density at 20°С, kg/m3, not more 885

 

VG TU 38.401-58-177-96

Produced from paraffinaceous oils using hydrocatalic processes, contains ionol as an additive.

Application Used in high-volt electric equipment.

 

Characteristics Norm
Kinematic viscosity, mm2/s
at 50 °С, 9
at -30 °С, 1,500
Acidity index, mg KOH/g, max. 0.01
Flash point determined in a closed melting pot, °C, min. 135
Pour point, °C, max. – 45
Stability against oxidation:
a) residue, % 0.015
b) low molecular volatile acids mg KOH/g 0.04
c) Acidity index after oxidation, mg KOH/g 0.1
Dielectric dissipation factor at 90 °С, %, max. 0.5
Density at 20 °C, g/cm³, max. 895

 

TKp TU 38.101890-81

TKp is produced from sweet nafthene-base oils by acid-base refinement. The oil contains ionol additive.

TKp is recommended to be used in electrical equipment working at voltage up to 500 kV and higher.

 

Characteristics Norm
Kinematic viscosity, cSt
at 50°С 9
at -30°С 1500
Acid number mg KOH/g of oil, not more 0,02
Flash point in the closed crucible, °С, not less 135
Pour point,°С, not more -45
Stability against oxidation, not more:
а) deposit, % 0,01
b) flying low-molecular acids, mg КОH/g 0,005
c) acid number after oxidation, mg KOH/g 0,1
Tangent of a corner dielectric loss at 90°С, %, not more 2,2
Density at 20°С, kg/m3, not more

 

Ciatim-201 GOST 6267-75

Csiatim-201 is low-viscosity petroleum oil, thickened by lithium stearate, it contains antioxidant additive.
Instrument grease Ciatim-201 is applied in friction and frictionless bearings, gear drives, aerotechnics control systems. Lubricant works at a temperature from – 60°C to + 90°C.

 

Characteristics Norm
Drop temperature, °С, not less 175
Penetration at 30°С, 0.1 mm 265-310
Breaking point at 20°С, Pa 350-500
Viscosity at -50°С and average gradient speed of deformation 10s-1, Pa/s, not more 1100
Colloid stability, %, not more 26

 

Ciatim-203 GOST 8773-73

Ciatim-203 is petroleum transformer oil, thickened with lithium soap of technical fat oil and sulfurized acidol. It contains thickening and antiscuff additives.

Low-temperature grease Ciatim-203 is used in friction and frictionless bearings, gear drives, screw pairs, loaded control system reducers. Lubricant works at temperatures from – 50°C to + 100°C. It surpasses Ciatim-201 by chemical and colloid stability, water resistance and wear-resistant characteristics.

 

Characteristics Norm
Drop temperature, °С, not less 160
Penetration at 30°С, 0,1 mm 250-300
Breaking point at 20°С, Pa 350-700
Viscosity at -50°С and average gradient speed of deformation 10s-1, Pa/s, not more 1000
Colloid stability, %, not more 10

 

Ciatim-205 GOST 8551-74

Ciatim-205 is used for lubricanting screwed and contact joints and sealing used in corrosion environment. Resistant to exposure to of concentrated mineral acids, alkalis, amines, spirits and hydrazines. Can be used at temperatures of -60 to +50ºС.

Characteristics Norm
Appearance Homogeneous petrolatum oily grease of white to light-cream color. Small graininess is permitted.
Drop point, °С, min. 65
Penetration at 25°С, max. 165
Colloid stability, %, max. 4
Acidity index, mg KOH/g of grease, max. 0.05
Corrosive effect on metals at 60°С during 24 h Passes
Protective properties test during 24 h Passes
Water-soluble acids and alkalis content Absence
Water content Absence
Mechanical impurities content, %, max. 0.010

 

Ciatim-221 GOST 9433-80

Ciatim-221 is organ-silicon fluid, thickened with complex soap; it contains antioxidant additive.
This thermostable grease is applicable in electric machine friction bearings, control systems and devices with rotation speed up to 10 000 min-l. The lubricant works at residual pressure 666.5 Pa in the temperature range from – 60°C to + 150°C.

 

Characteristics Norm
Drop temperature, °С, not less 200
Penetration at 30°С, 0,1 mm 280-360
Breaking point at 20°С, Pa 250-450
Viscosity at -50°С and average gradient speed of deformation 10s-1, Pa/s, not more 800
Colloid stability, %, not more 7

 

NK-50 TU 38.1011219-95

NK-50 is MS-20 oil thickened with soda soap of stearic and oleic acids. It contains colloidal graphite. NK-50 is used for aircraft undercarriage hub bearings. The old name for this grease is NK-50- air engine refractory ST. It works at temperatures from -15°C to +120°C.

 

Characteristics Norm
Drop temperature, °С, not less 200
Penetration at 30°С, 0,1 mm 170-225
Breaking point at 20°С, Pa 700-1200
Viscosity at -50°С and average gradient speed of deformation 10s-1, Pa/s, not more 1000
Colloid stability, %, not more 7

 

OKB-122-7 GOST 18179-72

OKB-122-7 is a blend of organic-silicon fluid and petroleum oil, thickened with lithium stearate and ceresin.
It is used in aviation electric machine bearings. The grease OKB-122-7 is operative at the temperatures from – 40 C to + 100 C.

 

Characteristics Norm
Drop temperature, °С, not less 180
Penetration at 30°С, 0,1 mm 175-205
Breaking point at 20°С, Pa 1000-1500
Viscosity at -50°С and average gradient speed of deformation 10s-1, Pa/s, not more 500
Colloid stability, %, not more 10

 

ERA (VNII NP-286M) TU 38.101950-00

The grease ERA (VNII NP-286M) is applied in friction and frictionless bearings, gear drives of electric equipment and of aviation control systems. It is active at a temperature from – 60°C to +120°C.

Characteristics Norm
Drop temperature, °С, not less 180
Penetration at 30°С, 0,1 mm 310-370
Breaking point at 20°С, Pa 200-350
Viscosity at -50°С and average gradient speed of deformation 10s-1, Pa/s, not more 115
Colloid stability, %, not more 22

 

Atlanta (VNII NP-254) TU 38.1011048-85

Atlanta (VNII NP-254) contains a package of metal plating additives. The grease is used in sliding friction units working at alternate load, in needle-shaped and screw mechanisms.

The grease Atlanta (VNII NP-254) is operative at temperatures between – 60°C and + 150°C., in short-time up to 200 °C.

Characteristics Norm
Drop temperature, °С, not less 165
Penetration at 30°С, 0,1 mm 310-340
Breaking point at 20°С, Pa 300-400
Viscosity at -50°С and average gradient speed of deformation 10s-1, Pa/s, not more 50
Colloid stability, %, not more 25

 

Sapfir (VNII NP 261) TU 38.1011051-87

Sapfir (VNII NP 261) is used in taper roller bearings of aircraft undercarriage wheel hubs.

The lubricant works at temperatures from – 60°C to + 150°C., shortly up to 200°C.

Characteristics Norm
Drop temperature, °С, not less 250
Penetration at 30°С, 0,1 mm 265-295
Breaking point at 20°С, Pa 240-420
Viscosity at -50°С and average gradient speed of deformation 10s-1, Pa/s, not more 7
Colloid stability, %, not more 5

 

PFMS-4S TU 6.02.917-79

PFMS-4S is polymethylphenylsiloxane fluid thickened with colloidal graphite.

The thermostable grease is used in aviation friction units, low-speed frictionless bearings, screw ball joint drives. PFMS-4S works at temperatures between – 30°C to + 300°C., for short time periods – up to 400°C.

Characteristics Norm
Drop temperature, °С, not less 180
Penetration at 30°С, 0,1 mm 175-205
Breaking point at 20°С, Pa 1000-1500
Viscosity at -50°С and average gradient speed of deformation 10s-1, Pa/s, not more 500
Colloid stability, %, not more 10

 

CEDA TU 38.1011242-89

CEDA is a mixture of esters thickened with complex calcium soap. It contains antioxidant and antiwear additives.
CEDA is used for lubrication of frictionless bearings of electric equipment (electric generators, starter-generators) and aircraft. It works at temperatures from – 60°C to + 180°C.

 

Characteristics Norm
Drop temperature, °С, not less 200
Penetration at 30°С, 0,1 mm
Breaking point at 20°С, Pa 250
Viscosity at -50°С and average gradient speed of deformation 10s-1, Pa/s, not more 2000
Colloid stability, %, not more 15

 

AMS-1, AMS-3 GOST 2712-75

AMS-1, AMS-3 are high-viscosity petroleum oil, thickened with aluminum soap of stearine acid.
Sea-water greases AMS-1, AMS-3 are used for hydroplanes and other aircraft sea water protection.
The grease is operative at temperatures from 0°C to + 70°C; grease AMS-1 is applied at temperatures from – 15°C to + 65°C.

 

Characteristics Norm
Drop temperature, °С, not less 100
Penetration at 30°С, 0,1 mm 200-250
Breaking point at 20°С, Pa 450-1200
Viscosity at -50°С and average gradient speed of deformation 10s-1, Pa/s, not more 2000
Colloid stability, %, not more 5

 

VNII NP – 207 GOST 19774-74

VNII NP – 207 is a blend of organic-silicon fluid and synthetic hydrocarbon oil thickened with complex soap. It also contains antioxidant additive.

The thermostable lubricant VNII NP – 207 is used in electric machinery frictionless bearings and starter-generators with rotational speed up to 10 000 min-1. The lubricant works at residual pressure 666.5 Pa in the temperature range from – 60°C to + 200°C.

Characteristics Norm
Drop temperature, °С, not less 250
Penetration at 30°С, 0.1 mm 220-245
Breaking point at 20°С, Pa 250-500
Viscosity at -50°С and average gradient speed of deformation 10s-1, Pa/s, not more 180
Colloid stability, %, not more 7

 

VNII NP-225 TU 38.101577-76

VNII NP-225 is organic-silicon fluid thickened with fine dyspersated molybdenum disulphide. The fluid also has stabilizing additive. It is used in threaded joints and high loaded low-speed units. VNII NP-225 works at the temperatures between – 60°C and +250°C (aluminum alloys), between – 60°C and +350°C (alloyed steels), between – 40°C and + 300°C (low-speed friction units).

 

Characteristics Norm
Drop temperature, °С, not less
Penetration at 30°С, 0.1 mm 400-430
Breaking point at 20°С, Pa 300
Viscosity at -50°С and average gradient speed of deformation 10s-1, Pa/s, not more 120
Colloid stability, %, not more 15

 

VNII NP-231 TU 38.1011220-89

VNII NP-231 is organic-silicon blend thickened with technical carbon DG-100.

The thermostable lubricant is used in close worm-screw mechanisms, low-speed frictionless and friction bearings. The lubricant VNII NP-231 works at residual pressure 666.5 Pa in the temperature range from – 60°C to + 250°C.

 

Characteristics Norm
Drop temperature, °С, not less
Penetration at 30°С, 0.1 mm 310-340
Breaking point at 20°С, Pa 250-450
Viscosity at -50°С and average gradient speed of deformation 10s-1, Pa/s, not more 50-75
Colloid stability, %, not more 8

 

VNII NP-232 GOST 14068-79

VNII NP-232 is medium-viscous petroleum oil thickened with lithium stearate.

The break-in oil is used in frictionless bearings, toothed bearings, screw gears and high load low-speed friction units. VNII NP-232 works at the temperatures from – 50°C to + 300°C.

 

Characteristics Norm
Drop temperature, °С, not less
Penetration at 30°С, 0.1 mm 220-250
Breaking point at 20°С, Pa 1800
Viscosity at -50°С and average gradient speed of deformation 10s-1, Pa/s, not more 300
Colloid stability, %, not more 4

 

VNII NP-282 TU 38.1011261-89

VNII NP-282 is perfluorinepolyether thickened with inorganic agent. Chemically stable lubricant is used in respiratory apparatus, threaded joints and friction units contacting with different mediums, including oxygen gas. The lubricant VNII NP-282 works at temperatures from – 45°C to + 150°C.

 

Characteristics Norm
Drop temperature, °С, not less 250
Penetration at 30°С, 0.1 mm 220-250
Breaking point at 20°С, Pa 280-750
Viscosity at -50°С and average gradient speed of deformation 10s-1, Pa/s, not more 250
Colloid stability, %, not more 10

 

Grease №9 TU 38.001116-84

Grease №9 is a low-viscosity petroleum oil thickened with bariumplumbum soap of stearine acid.

It is applied in lubrication in some specific friction units

Characteristics Norm
Drop temperature, °С, not less 92
Penetration at 30°С, 0.1 mm 330
Breaking point at 20°С, Pa 250
Viscosity at -50°С and average gradient speed of deformation 10s-1, Pa/s, not more 50
Colloid stability, %, not more 15

 

PVK GOST 19537-83

PVK with variable impact load. It works at the temperatures from – 69°C to +80°C. PVK is petroleum oil thickened with petrolatum and ceresin. It contains antioxidant additive. Preservation lubricant is applied for rust protection and used for metal conservation.

 

Characteristics Norm
Drop temperature, °С, not less 60
Penetration at 30°С, 0.1 mm
Breaking point at 20°С, Pa 1000-2500
Viscosity at -50°С and average gradient speed of deformation 10s-1, Pa/s, not more 1500
Colloid stability, %, not more 4